---
title: "QuickStart (QSG) [BLU-L]"
canonical: "https://help.gatee.eu/space/GHC/687243265/QuickStart%20(QSG)%20%5BBLU-L%5D"
format: markdown
---
Current downloads and platform information: [GATE Control Station](https://gatee.eu/pages/gate-control-station)
Read carefully before use. Keep for future reference.
The information contained in this document is subject to update without notice. When using a product listed here be sure to obtain the latest specifications.
Congratulations on your new Blu-Link!
Contents
> Macro (toc)
Blu-Link allows you to control GATE devices such as TITAN, ASTER, and STATUS and connect them to other compatible ones wirelessly via the GCS App. What’s more, Blu-Link is an additional adjustable smart fuse and multifunctional wattmeter enabling you to, e.g., read Telemetry data.
Together with the GCS App, you can adjust the settings of TITAN, ASTER, STATUS, and other GATE devices and update or upgrade their firmware.
Use Blu-Link with the GCS mobile app for Android and iOS. Check the official GCS download page for current platform guidance.
## Safety Summary
For your own safety, read the information below carefully before installing the device.
> ❌ **Warning**
> ❌ Situations that may cause injury to yourself or others.
> ⚠️ **Caution**
> ⚠️ Situations that may cause damage to your device or other equipment.
> ✅ **Notice**
> ✅ Notes, usage tips or additional information.
> ❌ **Warning**
> ❌ This equipment is not suitable for use in locations where children are likely to be present.
> ❌ **Warning**
> ❌ Persons under 18 years of age ought not stay unattended near the device during its installation or servicing in an ASG replica.
> ❌ **Warning**
> ❌ Persons under 18 years of age ought not stay unattended near the device installed in an ASG replica ready for use.
> ❌ **Warning**
> ❌ Persons under 18 years of age are not allowed to install or commission the device in an ASG replica.
> ❌ **Warning**
> ❌ Persons under 18 years of age are not allowed to service this device.
> ❌ **Warning **
> ❌ Before starting the installation process, make sure your AEG is empty and there are no BBs inside.
> ❌ **Warning **
> ❌ Do not store or carry flammable liquids, gases or explosives in the same compartment as the device, its parts or accessories.
> ❌ **Warning**
> ❌ Incorrectly connecting positive and negative battery terminals may cause immediate damage to the device, which is not covered by warranty and can lead to fire.
> ❌ **Warning**
> ❌ Blu-Link may only be used in replicas with tapped metal stock buffer tubes due to the risk of burns and a fire hazard.
> ⚠️ **Caution**
> ⚠️ Prevent the device from contact with conductive materials, such as dust, liquid or metal powder, etc.
> ⚠️ **Caution**
> ⚠️ Connecting batteries with voltage over 17 V will cause permanent damage to the device, which is not covered by warranty.
> ⚠️ **Caution**
> ⚠️ Do not remove the device protective heat-shrink tube.
> ✅ **Note**
> ✅ The product warranty form is available on our website: [www.gatee.eu/warranty](http://www.gatee.eu/warranty).
> ✅ **Note**
> ✅ In case you have any difficulties while installing or using this product:
> ✅
> ✅ - contact us via [https://help.gatee.eu](https://help.gatee.eu)
> ✅ - send us an e-mail: [support@gatee.eu](mailto:support@gatee.eu)
> ✅ - join [GATE Airsoft Community Discord Server](https://discord.gatee.eu/)
## Technical Specifications
| **Rated Voltage** | 4,75-17 VDC |
| --- | --- |
| **Rated Current** | 30 A |
| **Current Consumption without Load** | 280 uA |
| **Maximum Current Consumption without Load** | 45 mA (for 17 VDC) |
| **Dimensions (Length x Width x Thickness)** | 54,5 mm x 19,9 mm x 9 mm |
| **Finished Product Weight** | 9,65 g |
| **Operating Temperature Range** | min. -15° C, max. +50° C |
| **Relative Humidity** | ≤ 80% |
## How to Use Blu-Link
> ✅ **Note**
> ✅ You can use Blu-Link without an ETU. It will work as a smart fuse and a multifunctional wattmeter enabling you to, e.g., read Telemetry data.
### Initial Use
> ⚠️ **Caution**
> ⚠️ Please follow the steps below when first connecting Blu-Link. Do not use your mobile Android device’s system options to pair Blu-Link as it will not function correctly. In case you have done so, unpair the devices first.
1. Have the PIN number printed on the Blu-Link PIN card handy
2. Plug the AEG battery into Blu-Link INPUT, the green LED should glow for 1 s
3. A blinking blue LED means Blu-Link is ready to connect to GCS
4. Download and install GCS: [www.gatee.eu/gcs](http://www.gatee.eu/gcs)
5. Log into GCS
6. Tap **+ **in **Dashboard**
7. Enable Bluetooth® on your device
8. Enable the required permissions on your device (in order to search for available Blu-Link devices within Bluetooth® range); scanning for Bluetooth® devices commences automatically
9. Select the Blu-Link you want to connect to from the list of available devices; if your device is not found, pull to refresh or tap **Refresh Scan**
10. Enter the PIN number
11. Plug in your AEG/ETU into the Blu-Link OUTPUT connector
12. Enjoy using Blu-Link
> ✅ **Note**
> ✅ In case of problems with connection, check LED status with the Troubleshooting Card.
> ✅ **Note**
> ✅ Keep the Blu-Link PIN card or save PIN printed on it – you will need it for each new connection. If you lose your PIN, contact us at [support@gatee.eu](mailto:support@gatee.eu).
> ✅ **Note**
> ✅ Blu-Link is compatible with Bluetooth version 4.0 or later.
### Plug and Play
1. Plug the AEG battery into the Blu-Link INPUT connector, the green LED should glow for 1 s
2. Log into the GCS App any time
3. Tap **+ **in **Dashboard**
4. Enable Bluetooth**®** on your device
5. Enable the required permissions on your device (in order to search for available Blu-Link devices within Bluetooth® range), scanning for Bluetooth® devices commences automatically
6. Select the Blu-Link you want to connect to from the list of available devices; if your device is not found, pull to refresh or tap **Refresh Scan**
7. Plug in your AEG/ETU into the Blu-Link OUTPUT connector
8. Enjoy using Blu-Link
> ✅ **Note**
> ✅ In case of problems with connection, check LED status with the Troubleshooting Card.
### Blu-Link Installation in the Replica
1. Open the stock cover
2. Remove the stock buffer tube end cap
3. Plug in your AEG/ETU into the Blu-Link OUTPUT connector
4. Plug the AEG battery into the Blu-Link INPUT connector
5. Insert Blu-Link and the battery into the stock buffer tube
6. Replace the stock cover
7. Replace the stock buffer tube
8. Enjoy airsofting
## Troubleshooting
| **LED** | **What happened:** | **What to do:** |
| --- | --- | --- |
| 
1 s on start | Self-test completed successfully | - Blu-Link is OK
- Wait for further LED indications |
|  | Blu-Link has been connected correctly | |
| 
BLINKING for 120 s | Blu-Link is ready for Bluetooth connection® | Connect Blu-Link to GCS |
|  | Self-test failed, Bluetooth® connection is not possible | - Disconnect the power supply from Blu-Link, wait 10 seconds and reconnect the power supply
- If you have a USB-Link, connect it to the INPUT Blu-Link connector, go to **Diagnostics** in GCS, check Blu-Link DTCs and follow the instructions there
- Contact us at [support@gatee.eu](mailto:support@gatee.eu) |
| 
BLINKING | - No Blu-Link firmware installed
- Self-test failed, Bluetooth® connection is possible | - Install Blu-Link firmware via GCS
- Connect Blu-Link to GCS, go to **Diagnostics** in GCS, check Blu-Link DTCs and follow the instructions there |
| 
for 120 s | Blu-Link is connected correctly via Blutooth® | Enjoy using Blu-Link |
|  | Blu-Link firmware update in progress | - Wait until the firmware has been updated
- Keep the device with GCS as close as possible to Blu-Link |
|  | - Battery saving mode
- Battery disconnected | - Enjoy using Blu-Link
- Connect battery |
|  | - Discharged or damaged battery
- Battery Deans-T connector is not compatible
- Damaged power cables | - Charge or replace the battery
- Use the Deans-T battery connector included with the INSTALLATION KIT
- Replace power cables |
| 
BLINKING | Overload, DTC displayed: 2 – ULL, 3 – OCP, 4 – SCP, 5 – OTP | Read what to do in the next section or connect Blu-Link to GCS and check the **Diagnostics **tab |
| 
BLINKING | Excessively low voltage, DTC displayed: 1 – UVP1, 2 – UVP2, 3 – UVP3 | Read what to do in the next section or connect Blu-Link to GCS and check the **Diagnostics **tab |
#### Unable to update firmware of my Blu-Link on Android device
Your device is likely paired directly with your phone. You need to unpair it, as the connection should only be made through the GCS app.
Follow these steps:
1. Go to your phone’s list of paired Bluetooth devices.
2. Select your device from the list.
3. Tap the settings icon (gear icon).
4. Tap **"Forget"** (trash bin icon).
5. Open the **GCS app** and update your device.
If you encounter any issues, please contact us via [https://help.gatee.eu](https://help.gatee.eu)
### DTC Codes
Diagnostic Trouble Codes (DTC) indicate basic malfunctions and problems with your battery, AEG, ETU or Blu-Link. You are notified about them by a LED blinking for 120 s after the problem occurs. The Blu-Link DTCs can later be read and cleared in the **Diagnostics **tab in GCS.
#### In the Event of Trouble
1. The LED color reflects the problem type:
- Yellow indicates a warning
- Red indicates a problem
2. The number of blinks determines what exactly the problem is.
#### DTC Explanation
> ✅ **Note**
> ✅ If you are using an ETU connected to Blu-Link, also check the ETU DTCs. Blu-Link is designed to withstand higher power load and lower voltage than an ETU, so in most cases, ETU protection is activated earlier and Blu-Link does not detect the problem.
| **GCS Code (Old Code)**
warning
error | **Nname** | ** Error Description** | ** Possible reason** | **Possible solution ** | **LED (Review in GCS)** |
| --- | --- | --- | --- | --- | --- |
| UVP1 | Under Voltage Protection 1 | Protection against battery over-discharge (battery protection) activated | 1. Discharged battery
2. Battery type or number of battery cells set incorrectly | 1. Charge the battery
2. Set the correct battery type or number of battery cells | Yellow(1) |
| UVP2 | Under Voltage Protection 2 | Voltage has dropped below a critical level for your device to work properly | 1. Discharged battery
2. The battery is worn out and there is excessive internal resistance
3. Inadequate battery type for the current AEG configuration
4. Excessive electrical resistance between your device and the battery
5. Motor too strong for the connected battery
6. Motor connection short circuit
7. Jammed motor
8. Damaged motor | 1. Charge the battery
2. Replace battery
3. Use a battery with more capacity or higher voltage
4. We recommend using a battery with a Deans-T connector; if you need to use an adaptor, check the quality
5. Use standard or high-torque motors instead of high-speed ones
6. Check and fix motor wire insulation
7. Unjam the motor
8. Replace the motor | Yellow(2) |
| UVP3 | Under Voltage Protection 3 | Protection against battery over-discharge (battery protection) activated immediately after connecting the battery | 1. The number of cells is different from the number set in GCS
2. Discharged battery | 1. Set the same number of cells in GCS as in the battery
2. Charge the battery | Yellow(3) |
| OVP | Over Voltage Protection | Voltage exceeding a critical level for your device to work properly | 1. Connected battery type not supported by the unit | 1. Replace the battery | Red(*) + Blue(*) |
| TEMP (OTP) | Over Temperature Protection | Excessive device temperature – over-temperature protection activated | 1. The outside temperature is too high in relation to the requirements of your AEG
2. Frequent short circuits and device electrical overloads | 1. Wait until the temperature drops | Red(5) |
| OCP1 (E11) | Over Current Protection Type 1 | Excessive current detected – overcurrent protection activated | 1. Motor connection short circuit
2. Motor or gearbox jammed
3. Motor damaged | 1. Check and fix motor wire insulation
2. Unjam the motor or gearbox
3. Replace motor | Red(3) |
| OCP2 (E12) | Over Current Protection Type 2 | Excessive current detected – overcurrent protection activated | 1. Motor connection short circuit
2. Motor or gearbox jammed
3. Motor damaged
4. Battery voltage too high for the current motor | 1. Check and fix motor wire insulation
2. Unjam the motor or gearbox
3. Replace motor
4. Replace the battery | Red(3) |
| SELF (E14 STF) | Self-Test Failure | The device failed on self-test | 1. Device Internal Error
2. Always activated with other Device Internal Errors | 1. Clear the DTC
2. Unplug your device from the battery and Blu-Link/USB-Link and wait 10s
3. Connect your device to the battery and wait again 10s
4. Check the DTC again – if the error persists, contact us at [support@gatee.eu](mailto:support@gatee.eu) | Red(*) + Blue(*) |
| FET1 (E01 EA01 T_Drive) | Main Transistors Error | Main Transistors Error | 1. Device Internal Error | 1. Clear the DTC
2. Unplug your device from the battery and Blu-Link/USB-Link and wait 10s
3. Connect your device to the battery and wait again 10s
4. Check the DTC again – if the error persists, contact us at [support@gatee.eu](mailto:support@gatee.eu) | Red(*) + Blue(*) |
| VME1 (E03 EA03 VoltageSensor) | Voltage Measurement Error | Voltage Measurement Error | 1. Device Internal Error | 1. Clear the DTC
2. Unplug your device from the battery and Blu-Link/USB-Link and wait 10s
3. Connect your device to the battery and wait again 10s
4. Check the DTC again – if the error persists, contact us at [support@gatee.eu](mailto:support@gatee.eu) | Red(*) + Blue(*) |
| TSE (E04 EA04 TempSensor) | Temperature Sensor Error | Temperature Sensor Error | 1. Device Internal Error | 1. Clear the DTC
2. Unplug your device from the battery and Blu-Link/USB-Link and wait 10s
3. Connect your device to the battery and wait again 10s
4. Check the DTC again – if the error persists, contact us at [support@gatee.eu](mailto:support@gatee.eu) | Red(*) + Blue(*) |
| CSE (E05 AmpSensor) | Current Sensor Error | Current Sensor Error | 1. Device Internal Error | 1. Clear the DTC
2. Unplug your device from the battery and Blu-Link/USB-Link and wait 10s
3. Connect your device to the battery and wait again 10s
4. Check the DTC again – if the error persists, contact us at [support@gatee.eu](mailto:support@gatee.eu) | Red(*) + Blue(*) |
| CFG (E13 EA13 Config) | Configuration Error | Configuration Error | ? | 1. Restore factory settings
2. Install the newest firmware
3. Clear the DTC
4. Unplug your device from the battery and Blu-Link/USB-Link and wait 10s
5. Connect your device to the battery and wait again 10s
6. Check the DTC again – if the error persists, contact us at [support@gatee.eu](mailto:support@gatee.eu) | brak led |
| SCP1 | Short Circuit Protection 1 | Blu-Link detected Current over 270 A – short-circuit protection activated | 1. Motor connection short circuit
2. Motor or gearbox jammed
3. Motor damaged | 1. Check and fix motor wire insulation
2. Unjam the motor or gearbox
3. Replace motor | Red(4) |
| SCP2 | Short Circuit Protection 2 | Blu-Link has detected a shorted female Deans-T connector in Firing Mode | 1. Motor connection short circuit
2. Motor or gearbox jammed
3. Motor damaged | 1. Check and fix motor wire insulation
2. Unjam the motor or gearbox
3. Replace motor | Red(4) |
| U-OCP (USER_OCP) | User Load Limit | User load limit exceeded | 1. The load limit has been set too low in relation to AEG configuration
2. Other possible reasons are the same as in the case of OCP or SCP | 1. Modify the adjustable smart fuse settingsFollow the OCP or SCP guidelines
2. Contact us at [support@gatee.eu](mailto:support@gatee.eu) | Red(2) |
| BTDC | Bluetooth® Communication Error | Bluetooth® Communication Error | 1. Your device is too far away from Blu-Link
2. Radio signal too weak | 1. Move your device closer to Blu-Link | brak led |
| BTE | Bluetooth® Module Failure | Bluetooth® Module Failure | Device Internal Error | 1. Clear the DTC
2. Unplug your device from the battery and Blu-Link/USB-Link and wait 10s
3. Connect your device to the battery and wait again 10s
4. Check the DTC again – if the error persists, contact us at [support@gatee.eu](mailto:support@gatee.eu) | brak led |
| COMP (F_CompInm) | Comparator Error | Current Sensor Error | Device Internal Error | 1. Clear the DTC
2. Unplug your device from the battery and Blu-Link/USB-Link and wait 10s
3. Connect your device to the battery and wait again 10s
4. Check the DTC again – if the error persists, contact us at [support@gatee.eu](mailto:support@gatee.eu) | Red(*) + Blue(*) |
| ESC (ETU_SC) | Output Connector Short Circuit | Short circuit at the output connector or an internal error detected | A damaged external device was connected, a short circuit in the connector, an internal error | 1. Disconnect any connected external devices.
2. Check the condition of the connector (make sure there’s no dirt or bent parts).
3. Clear the DTC
4. Unplug your device from the battery and Blu-Link/USB-Link and wait 10s
5. Connect your device to the battery and wait again 10s
6. Check the DTC again – if the error persists, contact us at [support@gatee.eu](mailto:support@gatee.eu) | Red(*) + Blue(*) |
| CURS (F_Cur_Source) | Internal Power Supply Error | Internal Power Supply Error | Device Internal Error | 1. Clear the DTC
2. Unplug your device from the battery and Blu-Link/USB-Link and wait 10s
3. Connect your device to the battery and wait again 10s
4. Check the DTC again – if the error persists, contact us at [support@gatee.eu](mailto:support@gatee.eu) | Red(*) + Blue(*) |
| COMMT (F_G1W_TX) | G1W Interface Error 1 | G1W Interface Error 1 | Device Internal Error | 1. Clear the DTC
2. Unplug your device from the battery and Blu-Link/USB-Link and wait 10s
3. Connect your device to the battery and wait again 10s
4. Check the DTC again – if the error persists, contact us at [support@gatee.eu](mailto:support@gatee.eu) | Red(*) + Blue(*) |
| COMMR (F_G1W_RX_USBL) | G1W Interface Error 2 | G1W Interface Error 2 | Device Internal Error | 1. Clear the DTC
2. Unplug your device from the battery and Blu-Link/USB-Link and wait 10s
3. Connect your device to the battery and wait again 10s
4. Check the DTC again – if the error persists, contact us at [support@gatee.eu](mailto:support@gatee.eu) | Red(*) + Blue(*) |
| **LED** | **WHAT HAPPENED** | **POSSIBLE REASON** | **WHAT TO DO** |
| --- | --- | --- | --- |
|  | **ULL** – User load limit exceeded | - The load limit has been set too low in relation to AEG configuration
- Other possible reasons are the same as in the case of OCP or SCP | - Modify the adjustable smart fuse settings
- Follow the OCP or SCP guidelines
- Contact us at [support@gatee.eu](mailto:support@gatee.eu) |
|  | **OCP** – Blu-Link has detected excessive current activating overcurrent protection | - Motor damaged
- Motor or gearbox jammed
- Motor connection short circuit | - Replace motor
- Unjam motor or gearbox
- Check and fix motor wire insulation |
|  | **SCP** – Blu-Link has detected a current over 270 A activating short circuit protection | - Motor damaged
- Motor or gearbox jammed
- Motor connection short circuit | - Replace motor
- Unjam motor or gearbox
- Check and fix motor wire insulation |
|  | **OTP** – Blu-Link temperature is too high activating over temperature protection | - Excessively high outside temperature in combination with a tuned replica
- Frequent short circuits and Blu-Link electrical overloads | Wait until Blu-Link temperature drops |
|  | **UVP1** – Battery protection was activated | Battery discharged | Charge battery |
|  | **UVP2** – The voltage dropped below critical level for Blu-Link to work properly | - Battery discharged
- The battery is worn out and has excessively high internal resistance
- Inadequate battery type for current AEG configuration
- Too much electrical resistance between Blu-Link and the battery
- Motor too powerful for the battery connected
- Motor connection short circuit
- Jammed motor
- Damaged motor | - Charge battery
- Replace battery
- Use battery of greater capacity or voltage
- Do not use any adaptors
- Use standard or high-torque motors instead of high-speed ones
- Check and fix motor wire insulation
- Unjam motor
- Replace motor |
|  | **UVP3 **– Protection against battery overdischarge activated immediately after battery was connected | - The number of cells differs from the number set in GCS
- Battery discharged | - Set the same number of cells in GCS as in battery
- Charge battery |
> ✅ **Note**
> ✅ There may be several codes displayed one after another, e.g., SCP and UVP2: 4 red blinks, 2 yellow blinks.
> ✅ **Note**
> ✅ It is a good practice to clear the DTCs in GCS before each skirmish.
> ✅ **Note**
> ✅ Blu-Link is compatible with TITAN V2, TITAN V3, TITAN V2 NGRS, ASTER V2, ASTER V3, STATUS as well as future GATE products.
### Bluetooth® Trademark Attribution
The Bluetooth® by both, the word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by GATE Enterprise sp. z o.o. sp. k. is subject to licensing. Other trademarks and trade names are those of their respective owners.
## Product Compliance
### Certificate of Conformity
GATE Enterprise sp. z o.o. sp. k. hereby declare under our sole responsibility that GATE Blu-Link is in conformity with the essential requirements of the following directives: 2014/53/UE, 2011/65/UE.
### Product Compliance Regarding the Use of the ANNA-B112 Module
This device complies with Part 15 of the FCC [Federal Communications Commission] Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference; and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause interference; and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
This equipment operates on a secondary basis and, consequently, must accept harmful interference, including from stations of the same kind, and may not cause harmful interference to systems operating on a primary basis.
## Legal Notice
Please read this Legal Notice before operating your device and keep it for future reference.
This document contains important terms and conditions with respect to your device. By using this device, you accept those terms and conditions.
### Exclusion of Liability
GATE Enterprise sp. z o.o. sp. k. are not liable for any damages, injuries or accidents of any kind resulting from the use of this product or airsoft gun with the product installed, including (but not limited to) incidental or intentional damages to airsoft gun, airsoft gun parts, batteries and gearbox internals.
### Disclaimer
GATE Enterprise sp. z o.o. sp. k. take no responsibility regarding compliance of the product with the requirements of any law, rule or airsoft restrictions pertaining thereto.
### Intellectual Property
Intellectual Property owned by GATE Enterprise sp. z o.o. sp. k., including (but not limited to) devices, accessories, parts, software, documentation, is proprietary to GATE Enterprise sp. z o.o. sp. k. and protected under Polish laws, EU laws and international treaty provisions. You may not violate the rights of the Intellectual Property and you will not prepare derivative works of or reverse engineer the device or software. No ownership in the Intellectual Property is transferred to you.
### GATE Limited Warranty Policy
GATE Enterprise sp. z o.o. sp. k. warrant that their product is free from manufacturing and material defects at the date of purchase and for a non-extendable period of two (2) years from the date of purchase. This Limited Warranty is conditioned upon proper use of the product by Purchaser.
1. This Limited Warranty is valid provided that the owner provides a proof of purchase and a properly completed warranty form.
2. This Limited Warranty does not cover: (a) defects or damage (e.g., mechanical, thermal or chemical) resulting from accident, misuse (misinterpretation of the instructions), abuse, neglect, unusual physical, electrical or electromechanical stress, water immersion, repairs or structural modification of any part of the product, or (b) the product that has its serial number removed or made illegible; (c) defects or damage from improper operation, maintenance or installation; (d) installation of the products.
3. Requests for warranty are processed as soon as possible, not exceeding 7 (seven) working days. The company’s obligation under this Limited Warranty shall be limited to providing replacement of part(s) only.
### Product Disposal Instructions
The symbol shown here means that the product is classified as Electrical or Electronic Equipment and should not be disposed with other household and commercial waste at the end of its working life. The Waste of Electrical and Electronic Equipment (WEEE Directive 2012/19/EU) has been put in place to recycle products using best available recovery and recycling techniques to minimize the impact on the environment. Purchasers shall take any old electrical equipment to waste recycling public centers or points of sale.
Stay tuned with GATE
[https://www.facebook.com/gatee](https://www.facebook.com/gatee)
[youtube.com/GateMovies](http://youtube.com/GateMovies)
[instagram.com/GateEnterprise](http://instagram.com/GateEnterprise)
Manufactured by
GATE Enterprise sp. z o.o. sp. k.
Torowa 3H
PL-30435 KRAKÓW
email: [office@gatee.eu](mailto:office@gatee.eu)
tel: +48 12 210 05 23
[www.gatee.eu](http://www.gatee.eu)